1/10 Wraith 1.9 4WD Rock Crawler Brushed RTR, Orange

Introduction The Axial® Wraith™ 1.9 4x4 is a new, 1/10 scale, ready-to-run platform that delivers it all - technical rock crawling prowess and detailed scale looks. Take the wheel and take command over mud, rocks, sand, and through any kind of backyard terrain! Features Strong tube chassis with forward-mounted battery position Boatsides/skid plate for extra clearance Chassis-mounted servo for a realistic look Easy access to electronics, and adjustable battery tray New body design with LED lights, and grille, radiator, fender, and V8 engine details Spektrum™ Transmitter and Receiver Licensed 1.9 Nitto Trail Grappler M/T tires on KMC XD229 Machete crawl wheels Compact AX10™ transmission AR44™ hi-pinion axles for added ground clearance WB8 HD Wildboar™ driveshafts Dual slipper clutch with 32-pitch gearing 4-Link rear suspension Needed to Complete 2-3 Cell LiPo or 5-9 Cell NiMH/NiCd battery with IC3/EC3 connector Compatible battery charger (4) AA Alkaline batteries What's in the Box? (1) Axial Wraith 1.9 1/10 4WD RTR with: (1) Spektrum™ SRX200 Receiver (installed) (1) Tactic® TSX45 Metal Gear Servo (installed) (1) Axial® 35T Electric Motor (installed) (1) Dynamite® Electronic Speed Control with Drag Brake (installed) (1) Spektrum™ STX2 Transmitter (1) Product Manual Overview At its foundation the Axial Wraith 1.9 4x4 is the first full tube frame chassis in RC, providing the durability you need for aggressive action on tough terrain. Refining the proven 2.2 Wraith chassis design, Axial improved the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling by helping the vehicle slip through and past obstacles. Your battery mounts at the front of the chassis, for easy access and to provide the best weight distribution for aggressive climbing. For scale looks, Axial moved the servo off the top of the axle and onto the chassis - just as a full-size truck has its steering box located on the frame. The Wraith 1.9 truck's drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles. The pinion gear is 6mm above center, raising the ground clearance and improving driveshaft angles. Axial boosts the overall strength with metal gear construction; large, flex-reducing load bearings; increased gear surface contact; and a gear ratio that's optimized to reduce torque twist. Adjustable oil-filled, coil over shocks allow you to tune dampening for the best handling on any track. Molded from durable S30 compound, the officially licensed Nitto Grappler tires have a large block tread that gets excellent bite on a wide range of surfaces. The Wraith 1.9 truck looks ready to climb mountains even when it's standing still. At the front end of its polycarbonate body you'll find a molded plastic grille, radiator detail, and two large, LED-equipped headlights. Raise the hood and you'll see a replica V8 engine tucked in front of the chassis battery mount. That V8 isn't just for show. It's also a rugged receiver box that guards the model's Spektrum™ SRX200 receiver from water, dust, and debris. The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery pack with IC3™ connector, compatible battery charger, and four AAs for the included Spektrum 2.4GHz transmitter. It's easy enough for new RC hobbyists, with the design sophistication to take experienced drivers on incredible adventures far beyond the end of the road. Approximate Assembly Time No assembly required Ball Bearings Full set included Batteries One 2-3S LiPo battery with IC3 connector, or one 5-9 cell NiMH battery w/IC3 connector, sold separately Body Molded polycarbonate with plastic grille and molded plastic inner fender wells Charger Sold Separately Chassis Full tube frame constructed of high-strength impact resistant composite plastic, new chassis design moves battery tray to front for easier access and better weight distribution, new lower rails and skid plates are narrower for added clearance Completion Level Ready-To-Run Differential Bevel gear Drivetrain 4WD Final Drive Ratio 42:1 Gear Pitch 32-Pitch Ground Clearance 2.73" (69.4mm) Height 8.8" (223.3mm) Internal Gear Ratio 2.6:1 Length 17.8" (451.6mm) Motor Size 540 Motor Type 540 size, 35T brush equipped, integrated cooling fan, Brushed Pinion 13T Radio Included Receiver Included Scale 1/10 Servos Tactic TSX45 high-torque metal gear dual ball bearing steering servo Shock Type Adjustable oil-filled Speed Control Included Spur Gear 56T Suspension Multi link solid axle 4-link, optimized to reduce axle steer and torque twist Tire Compound Sticky R35 firmness compound Tire Tread Grappler Vehicle Type 1/10 scale 4WD crawler, Rock Crawler Water-Resistant Yes Weight 4.65lb (2.1kg) Wheel Type KMC XD229 Machete Wheel Width 1.2" (26mm) Wheelbase 12.13" (308mm) Width 8.8" (223.3mm)