58577 1/10 Novafox Kit

This is the Electric Powered, Radio Controlled, 1/10 scale Novafox Buggy Kit from Tamiya. **Improved Re-release Version of 2wd Racing Buggy from 1985.** FEATURES: Chassis: ABS resin, monocoque design Drive: Rear wheel with dogbone type driveshaft Motor: 540 size brushed Pinion Gear: 15T metal Electronic Speed Control: Tamiya TEU105BK with reverse Body: Clear molded polycarbonate with white plastic helmeted driver figure Suspension: Four wheel independent with front stabilizer bar Shocks: Oil-filled, plastic body, front mono shock, two rear CVA shocks Gearbox: Sealed Differential: Bevel gear Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver and adjustable linkage Tires: Front grooved, 0.82" (21mm) wide, 3.3" (84mm) diameter Rear pin spike, 1.45" (37mm) wide, 3.4" (87mm) diameter Wheels: Gold colored metal plated plastic, Front 0.79" (20mm) wide 2.2" (56mm), Rear 1.2" (32mm) wide, 2.0" (50mm) diameter INCLUDES: Novafox Buggy Kit, with Clear Body, Driver Figure, Brushed Motor, ESC, Wheels, Tires, Decals, and Instruction Manual REQUIRES: Radio: 2-channel with high torque steering servo Battery: 7.2V 6-cell stick with Standard connector Polycarbonate safe spray or brush on paint Building and track equipment SPECS: Vehicle, Length: 16.7" (425mm) Width: 8.8" (225mm) Height: 5.2" (133mm) Body, Length: 12.25" (311mm) Width: 5.3" (136mm) Height: 3.2" (81mm) COMMENTS: To paint body to match photos on box, order the following Tamiya colors; PS-4 Blue, TAMR8604 PS-5 Black, TAMR8605 X-18 Semi Gloss Black, TAMR1518 XF-15 Flat Flesh, TAMR1715 For Replacement or to Upgrade to Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x8mm Counter Gear 1 DTXC1523 2 5x11mm Gearbox 1 DTXC1547 4 5x11mm Rear Hubs 2 DTXC1547 4 5x11mm Front Hubs 2 DTXC1547