LIPO 3S 11.1V 1050 AXE CP

This is the 11.1V 1050mAh 3S LiPo Battery Pack for use with the AXE CP Helicopter from Heli-Max, HMXE0810. FEATURES: Replaces worn or damaged battery packs 16 AWG wire leads with Deans Ultra Female connector INCLUDES: 11.1V 1050mAh LiPo with Deans Ultra Plug and Balancing Connector REQUIRES: LiPo Charger, HMXP1004 SPECS: Length: 2.1" (53.3mm) Width: 1.2" (30mm) Height: 1.2" (30mm) Weight: 3.3oz (95g) COMMENTS: Never charge in excess of 4.20V per cell. If the battery should become damaged, discard the battery. Do not attempt to use a damaged battery. Disconnect the battery from the charger and carefully move the battery to a fireproof location if the battery begins to swell or smoke! Never charge at currents greater than 1C. Always charge in a fireproof location. Never trickle charge. Never allow the battery temperature to exceed 150° F (65°C). Never disassemble or modify pack wiring in any way or puncture cells. Never discharge below 2.75V per cell. Do not place the battery on a flammable surface or near a combustible material while in use.